Dreamscience ST225 Stage 2.
Tune your Focus ST225 to Stage 2!
The Dreamscience ST Stage 2 Tuning Upgrade kit has been specifically selected to include the best components to tune your Ford Focus ST225. Full fitting and setup of your vehicle is available!
Dreamscience Cat Back.
The exhaust is constructed from 304 grade stainless steel, it is mandrel bent to ensure a smooth and unrestricted exit of gasses from the engine, this is also helped by the de cat and the 5″ Rear inline silencers.
This exhaust does not use the traditional large silencer at the rear of the vehicle as we have chosen to use two inline silencers, not only do they give a sporty sound they have a unique look and save weight.
After customer feedback, we have also taken the 2 rear in line resonators and increased their size from 4” diameter to 5” diameter, the effect of this is a softened and reduced cabin noise, especially in the cruise, while maintaining the aggressive roar and growl at the rear and outside of the car.
With the Dreamscience Exhaust system you have the choice between two tip styles, 4″ slash cut hard edge and 4″ slash cut rolled in
OR Add the Ceramic Black Tips to your package. + £60.00
The Dreamscience ST225 CAIS is truly a revolutionary piece of kit designed to maximise the performance of your ST225 Engine. The kit is manufactured from top high grade aluminium, mandrel bent and powder coated black. There is only one internal weld on this kit and for the most part a specialist mandrel bending machine has been used to form the turns and bends in the pipes. This kit also has rolled ends which offers better grip to the joining silicon hoses and boasts a venturi system which helps accelerate the air to the turbo inlet while providing a unique turbo note.
The induction kit ticks all the boxes for a quality induction kit with a uniform pipe size throughout, no 90 degree bends, no expansion chamber like in some kits which can cause part throttle flat spots and hesitation, and no part of the kit is between the radiator and block so heat soak is not an issue. This kit was designed by engineers with PHD level qualifications in physics and is intended to maximise the performance of your engine and be the most efficient system for supply unrestricted cold air to the turbo with the shortest and most direct route.
As can be seen in the illustrations below Ford themselves have followed the same design with the RS MK2 induction as this is truly the most efficient way of supplying direct, cool air to the turbo.
The lower pipe has a Dreamscience Dry charger filter rated up to 550Bhp, we also offer a Piper cross equivalent for those who prefer a non oiled filter. The cone gets a direct cold air feed from the lower right grill and is still more than high enough to avoid any water contamination.
Dreamscience Intercooler (400bhp)
The Dreamscience ST225 CAIS is truly a revolutionary piece of kit designed to maximise the performance of your ST225 Engine. The kit is manufactured from top high grade aluminium, mandrel bent and powder coated black. There is only one internal weld on this kit and for the most part a specialist mandrel bending machine has been used to form the turns and bends in the pipes. This kit also has rolled ends which offers better grip to the joining silicon hoses and boasts a venturi system which helps accelerate the air to the turbo inlet while providing a unique turbo note.
The induction kit ticks all the boxes for a quality induction kit with a uniform pipe size throughout, no 90 degree bends, no expansion chamber like in some kits which can cause part throttle flat spots and hesitation, and no part of the kit is between the radiator and block so heat soak is not an issue. This kit was designed by engineers with PHD level qualifications in physics and is intended to maximise the performance of your engine and be the most efficient system for supply unrestricted cold air to the turbo with the shortest and most direct route.
As can be seen in the illustrations below Ford themselves have followed the same design with the RS MK2 induction as this is truly the most efficient way of supplying direct, cool air to the turbo.
The lower pipe has a Dreamscience Dry charger filter rated up to 550Bhp, we also offer a Piper cross equivalent for those who prefer a non oiled filter. The cone gets a direct cold air feed from the lower right grill and is still more than high enough to avoid any water contamination.
One Shot Tune
This is a File only option to tune your PCM, this remap will dial in all the new modifications fitted to your car. The “One shot map” option included within the price requires the vehicle to be mapped at DSHQ (Hull, HU3 4RB). If you wish to have this Stage 2 package delivered rather than fitted, we shall send the cat back, induction kit, intercooler and any additional extras (if any) via our courier services. However, the vehicle will require to come to our DSHQ to upload the Stage 2 One shot map. If this option is not possible due to distance issues or something similar, we offer the upgrade to Dreamscience iMap handset for an additional £200. The iMap contains Stage 1 to Stage 3 software pre-loaded which allows you to upload the tune file yourself. For more info on the iMap click the link. Stratagem iMap.
Optional Oil and Filter Change
Select our optional oil and filter change below to finish off your Dreamscience Stage 2 performance package. With the modifications carried out it’s obvious that the standard oil and filters fitted to your car will not suit the power increase. We’ll supply and fit superior grade oil and filters to help protect your engine under the new higher performance levels you’ll be achieving.
Please note that as this is a fitted optional extra you should only add this option if you are intending to bring your car to our headquarters for fitting.
Optional Deluxe ECU Mount
While fitting your Dreamscience Stage 2 Kit why not add a fully compatible RS mk2 ECU Mount?
This ECU Mount gives the engine bay more of a standard/tidy look, whilst protecting the delicate ECU from any water ingress.
Read More
